Please follow steps and screen shots on how to Download & Export Footage from web browser, or feel free to get in touch for further help.
1.Open Microsoft Edge.
2.Input your IP address of your NVR/ DVR in the search bar.
3.Input your login details.
4.Click the playback button.
5.Click the camera you would like the footage from.
6.Select the date of the footage.
7.Click the download Button.
8.Then you will need to select the time of the footage you would like to download.
9.Then click download.
10.It will then save to your downloaded file to open.
The best software to view downloaded files is VCL player from your Microsoft store.
If your having trouble finding your IP address you could always download Advanced IP Scanner and look Hikvision in manufacture column.
Cat5e or cat6, what will be best for you… Let us explain the difference’s and you can see what suits your needs best.
In this blog we will explain this difference between cables and choosing the right install will have a massive impact to your networks. Yes, they both connect to the internet, but you may need to access/ transfer large files, or you may only need to send emails.
Well, here is everything you need to know about Cat5e and Cat6 cables.
Firstly, you have all heard of an ethernet lead right?… Probably got a few lying around the house/ office to connect your devices into the router.
Well, it once was Cat5, but as we have evolved the cable manufacturing standards up to Cat5e. The ‘e’ means enhanced, Cat5 cable has a bandwidth of up to 100 MHz, support 10 or 100 Mbps speed.
Then they enhanced it, which means it now supports faster data transmissions. It achieves this by reducing the interference between cables.
By doing this they are now able to provide faster transfer rates, from 1000 Mbps and up to 1Gbps (Gigabit Ethernet).
Comparison Chart: Cat5 vs Cat5e
|Cable||Cable Type||Frequency (Bandwidth)||Max Speed (100mts)||Characteristic Impedance||Main Difference|
|Cat5||UTP||100 MHz||10/100 Mbps||100 ohms||More crosstalk|
|Cat5e||UTP||100 MHz||1000 Mbps / 1 Gbps||100 ohms||No Crosstalk. (or Less)|
The standards for Cat6 are more stringent for crosstalk and system noise then Cat5 & Cat5e cable. Performances up to 250mghz compared to 100mghz Cat5 & Cat5e.
Cat6 cable can meet the requirement for 10Gb, providing its maximum length is no more than 55 meters (180ft).
Anything over 55 meters you would be looking at Cat6a. This cable is characterized to 500 MHz and has improved alien crosstalk characteristics, allowing 10Gb to be run for 100 meters (330 ft) maximum distance as previous Ethernet variants.
Cat6 cable is also equipped with a spline, this is to separate the twisted pairs to eliminate the crosstalk.
Well that all depends on your day-to-day activities. Do you require large files from servers or sending/uploading big files? (Even streaming can be quite stressful on your network), then Cat6 will be ideal for you.
If your just sending emails and browsing internet pages, then you would benefit from Cat5e which would be more than efficient.
We also need to think about cost’s…
Cat5e is obviously cheaper then Cat6 but choosing ‘cheap’ is not always best as discussed before it is all down to what you need when it comes to performance. Another thing to keep in mind is cable containment around the office.
Cat5e is a lot smaller in diameter then Cat6, this means smaller containment more space around the office. Cat6 on the other hand is a lot thicker and the bend radius compared to cat5e would cause a lot more transmission failures.
If you need more information on this topic, why not get in contact with us today.
The Difference Between Types of Fibre Optical Cables
Fibre optical cables, multi-mode, single-mode are one of the most reliable and versatile options on the market, sending information through pulses of light. If you’re in the market for fibre optical cables, you’ve probably looked at the options of both single mode and multi-mode fibre cables. The difference between the two can be confusing to the naked eye, but they fundamentally impact the performance level of each cable. We’re taking an in-depth look at the difference between single mode and multi-mode in terms of construction, cost, and distance.
Fibre optical cables work by sending light through the cable with photon particles bouncing down the cable due to the internal reflection. This light beam travels down through the core of the cable, which sits at the middle of the cable’s glass structure. Around the core, there is a cladding layer of glass that keeps the light refraction inside the core.
The mode is the path that the light follows through the fibre, which is why you have single mode and multi-mode fibre cable options. The single mode has the simplest structure with the smallest core, leading the signal to travel directly through the core. With a multi-mode fibres optical cable, the core is around ten times the size, and the light travels through multiple paths.
We’re taking a look at the differences between single and multi-mode fibre optical cables, which primarily sits in the bandwidth, colour sheath, cost, core diameter, distance, light source, and wavelength. We are looking at both single and multi-mode options separately, so you can decide which one is best suited for your project.
All Fibre Optical cables are normally made to specifications from the manufacturer for more information please see link.
Structured cabling is a telecommunication cabling infrastructure with different smaller elements, giving it the ‘structured’ name. The purpose of structured cabling is to give you a dependable and predictable performance rate with flexibility for everyday use that allows for maximising the system availability. Structured cabling can help to future proof the usability of your cabling system.
This style of cabling brings organisation to your infrastructure. The patch panels and trunks create a structure within the system that allows hardware ports to be connected to the patch panel, which is connected to another through a trunk (using multi-fibre optic cables) in the main distribution area. The MDA is essential to the structured cabling as it allows for the adds, changes, and moves to occur with the shorter length patch cords.
Structured cabling with multi-mode fibre optic cables allows you to reduce the potential downtime caused by human error and gives you a cleaner look than a point-to-point cabling method. It’s also a time-saving option as it’s quicker to trace cables and ports to make changes.
For your home or a small office, the computer cabling you’re most likely to be using revolves around single mode fibre optical cables. These are the simplest form of fibre optic cabling as there is a reduced light reflection which allows the signal and transmission to travel quickly through the wires. The data transmission can carry over a larger distance, making it ideal for TVs, internet, and telephone signals.
For computer networks set up in a larger office or data centre, multi-mode fibre optical cables are used as they carry your data transmission across a shorter distance due to higher light refraction.
A single mode fibre optical cable uses one type of light mode, while multi-mode cables propagate multiple modes. Due to their attenuation, these single-mode OS2 cables are typically used for long-distance single transmission. These cables are usually used in carrier networks, MANs and PONs.
The core diameter for a single mode fibre is significantly smaller than a multi-mode option. For an OS2 single mode, the diameter is 9um – whereas an OM3 or OM4 multi-mode has a diameter of 50um. With a single mode fibre optic cable, laser or laser diodes product the light that is injected into the cable, typically producing a wavelength of 1310nm and 1500nm.
As the diameter in a single mode fibre is smaller, the light which passes through the cable is not reflected in the same way as multi-mode cables, which leaves the attenuation at a minimum. The attenuation for a single mode fibre at 1310nm is 0.36dB/km, compared to OM3 multi-mode fibres having an attenuation of 3.0dB/km at 850nm. As the attenuation is reduced due to the limited internal light ray reflection, single mode fibre optic cables give you a higher speed of data transfer over a larger distance.
As single mode cables have one light mode, their bandwidth is unlimited as a result. One of the most noticeable differences between the two is their colour sheath. For a single mode fibre cable, they have a yellow outer sheath.
For most people, the difference they care most about is the cost involved in the system and installation. While single mode fibre cables have their benefits, they’re also the most expensive. A typical single mode fibre solution can cost up to five times the price of a multi-mode fibre.
As these cables work on a longer distance, the transceivers require lasers at a longer wavelength with a smaller spot-size and narrower spectral width to work. The increased transceiver and interconnect costs come from the need for higher-precision alignment and tighter connection tolerance.
Although they have a higher system cost, single mode fibre optics have a lower upgrade installation cost. When it comes to upgrading your system, the labour costs for replacing multi-mode OM3 and OM4 cables is higher than the single-mode OS2.
Multi-mode fibre optic cables have a larger core with significantly increased reflection, which leads to higher attenuation and dispersion rates, giving a higher bandwidth delivery for shorter distances. Multi-mode cables are typically used for communicating data across a small, localised area where a large volume of data needs to be sent. The number of core cables in the multi-mode determines the data load it can carry. As the multi-mode cables travel a shorter distance, you’ll usually find them in data centres, enterprises, and LANs.
OM3 and OM4 multi-mode fibre cables have a core diameter of 50um, compared to the 9um of an OS2 single mode. The larger diameter size enables the multi-mode fibres to have simpler connections, and they possess a higher ‘light gathering’ ability.
Multi-mode cables have a limited bandwidth due to their light mode – for an OM5 multi-mode fibre, this is currently 28000MHz*km. As multi-mode fibre optic cables have a larger core size, some of their more affordable light sources – such as LEDs – work with an 850nm wavelength.
Multi-mode fibres travel a shorter distance due to their larger core size and model dispersion, allowing them to support multiple light modes. While it travels a shorter distance, these cables can carry a larger data load than OS2 single mode cables – which carry a lighter load over a longer distance.
In terms of visual differences, a multi-mode fibre optical cable has an outer sheath coating in either blue or orange. The cost difference between the two is the next noticeable difference. Multi-mode optical transceivers cost significantly less than their single-mode counterparts by two or three times the price. The speed will largely determine the cost of the multi-mode optical transceiver.
The system cost of operating multi-mode fibre optics is reduced as they’re easier to manufacture with a more versatile design that works for various devices, with them being produced at a lower cost than OS2 single mode alternatives. The upgrade cost to 100G for standard-based premise applications is also lower for multi-mode fibre optics.
The OM3 and OM4 multi-mode cables can carry a higher data rate than the single-mode OS2 cable, even though the latter can travel a larger distance. The distance is usually the deciding factor between whether you go with single or multi-mode cables. If you only need a few hundred meters of distance, a multi-mode cable would work best. If you need a significantly higher distance, a single mode cable will be more suitable. You’ll also want to consider the cost of future upgrades when you’re coming up with your budget – as the cost of a single fibre optic upgrade is lower.
Both single and multi-mode fibre optic cables have their benefits, and the differences are what makes them work better for certain projects over others. You’ll want to consider your budget, the bandwidth speed you need, and the distance you want the fibre optic cables to cover. You can’t mix single mode and multi-mode fibres together due to their different core sizes and light modes. Mixing the two would result in an optical loss and reduced efficiency.
Similarly, you can’t use a multi-mode transceiver for a single mode cable as an optical loss will occur. You could use a single mode transfer for certain multi-mode fibre cables if you need to. You want to consider all the factors we’ve mentioned in this article to find the fibre optic cables that will work for your network needs.
For more information don’t hesitate in getting in contact with our specialist team.